Model: BIOS LEO, BIOS N690, BIOS N690CA3000/RMP, BIOS N690CA4002/SEF, BIOS N690CA4003/SEG, BIOS N690CA4003/SUK, BIOS N690CA4004/SUK, BIOS N690CA4100/SEF, BIOS N690CB3000/SEG, BIOS N690CB4000/SUK, BIOS N690CB4002/SEF, BIOS N690CR2000/SEF, BIOS N690CR2000/SEG
Operating System: Windows 3.1 (Note: might work with other versions of this os.)
File: 20051209084745312_f82717.exe
Comments:
Samsung BIOS LEO, BIOS N690, BIOS N690CA3000/RMP, BIOS N690CA4002/SEF, BIOS N690CA4003/SEG, BIOS N690CA4003/SUK, BIOS N690CA4004/SUK, BIOS N690CA4100/SEF, BIOS N690CB3000/SEG, BIOS N690CB4000/SUK, BIOS N690CB4002/SEF, BIOS N690CR2000/SEF, BIOS N690CR2000/SEG Driver. BIOS To perform a BIOS upgrade. As Samsung use more than one flash device for the BIOS in the VM8000 we have found that certain chips do not program well using the f82717.exe command. If you find that you get a message stating that the flash device is not found or not supported, please use the second set of instructions below (using the flash82x.exe command) 1.Create a bootable floppy disk 2.Copy the file f82717.exe to the floppy 3.Copy the BIOS version you want to the floppy 4.Rename the BIOS file to bios.rom 5.Ensure that your machine is powered from the mains, not battery 6.Boot from your bootable floppy disk. 7.At the A: prompt type f82717 bios.rom or At the A: prompt type flash82x bios.rom 8.Wait until the instructions on the screen advise you that the update is completed, then remove the floppy disk and reboot
File Contents: No file content information available at this time.