Model: BIOS KV8-MAX3
Operating System: (Note: might work with other versions of this os.)
File: kv816.exe
Comments:
Socket 754
Please use flash utility AWDFLASH v8.24F to update KV8-MAX3 BIOS.
Fixed un-expected warning beeps in certain circumstances
Change the Vcore low limit in ABIT EQ.
Restart Windows
Get into BIOS setup page and then exit.
Synchronize the CPU Fan Fail Shutdown function with ABIT EQ.
Reserve IRQ 12/14/15/9 for Mouse/IDEchannel0/IDEchannel1/ACPI in the "PnP/PCI Configuration".
Fixed the problem that the system will go into STR mode automatically if
The system is waked from STR by "BIOS RTC Alarm Wake Up".
The system stays idle for several minutes.
Fixed the problem that the AGP and DDR voltage will be incorrect if User loaded "Setup Default". Save and Exit without entering the SoftMenu first.
Fixed the problem that the "Memory Hole" function is not functioning.
Set the default DDR voltage to 2.6V if the memory is operating at DDR400.
Synchronize the Fan EQ function with ABIT EQ.
Fixed the incorrect CPU voltage shown in the DMI data.
Disable Winbond W83627HF sensor unit to prevent incorrect CPU voltage information shown in some third party software.
Change AGP mode item to Auto/4X/2X/1X if AGP 2.0 card is installed and to Auto/4X/8X if AGP 3.0 card is installed.
BIOS compile date: 11/07/2003.