Model: BIOS P5VD2-X
Operating System: (Note: might work with other versions of this os.)
File: 5VD2X211.zip
Comments:
Socket775
Fixed PCI LAN device may get re-detected when system power on or resume from S3 mode.Update JMicron Option ROM to ver.1.06.64.Adjust S3 resume algorithm. Fine tune CPU temperature detection algorithm.Enable support for TM1 and TM2 on Conroe and ConroeL CPU processor. Fixed system will not light up when set ESATA_PCIE Item to PCI-ex1 while MATROX PCI-ex1 VGA card has been installed on PCIEx1 slot. Fixed system will not be able to resume from S3 with some PCIE Graphic card. Fixed after change CPU FSB to 134Mhz/267Mhz in BIOS, both DMI and POST screen still show 133Mhz,266Mhz.Readjust Q'fan control algorithm.Fix CPU ratio will be defaulted to minimum value when first installed ConroeL CPU onto this motherboard..Reduce time taken to resume form S3.Fixed fail to display when installing PCI-ex4 or PCI-ex8card at PCI-ex16 slot, and using PCI VGA card for display.Fixed system will hang after resuming from S3.Reduce time taken to flash BIOS using EZFlash2. Added New Micro Code to support new CPUs Fixed that ACPI/APM S5 WOL still works when PS2 KB/MS set disable BIOS Firmware File